3 Series E36 M3 (S50) SAL
Installation:
Replace sealing ring.
Open screw plug on control valve.
Installation:
Replace seal.
Insert M8x50 screw (1) with continuous thread, nut (2) and
strong washer (3) with larger outside diameter (e.g. washer of
cylinder head bolt) in control valve (4).
Remove control valve (4) by turning nut (2).
Installation:
Screw bolt (1) with nut (2) and shim (3) into control valve (4).
Adjust distance between washer (3) and control valve (4) to X =
20 + 1 mm.
RA Dismantling and reinstalling cylinder head - cylinder head removed (S50)
BMW AG - TIS
09.02.2013 20:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
