3 Series E36 M3 (S50) SAL
11 13 000
Removing and installing, sealing or replacing
oil pan (S50)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Remove windshield wash pump (1) from water container on
windshield washing unit, disconnect electrical connections (2) and
unfasten screw (3).
Remove water container from windshield washing unit.
Removing intake filter housing,
refer to 13 71 000
Remove air intake duct from air accumulator.
Remove guide pipe for dipstick.
Installation:
Check O-ring, replacing if necessary.
RA Removing and installing, sealing or replacing oil pan (S50)
BMW AG - TIS
09.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -