3 Series E36 M3 (S50) SAL
11 13 500
Removing and installing, sealing or replacing
oil pan (S50)
(engine removed)
Open oil drain plug or drain off oil.
Installation note:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 13 1AZ
Unscrew heat-protection plate from top of exhaust manifold (6
screws).
Remove exhaust manifold.
Installation note:
Coat thread with copper paste (refer to BMW Parts Service)
Replace nuts.
For tightening torque,
refer to Technical Data 11 62 1AZ
RA Removing and installing, sealing or replacing oil pan (S50)
BMW AG - TIS
09.02.2013 20:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
