3 Series E36 M3 (S50) SAL
Important!
Do not twist crankshaft.
Use the old conrod bolts to check conrod clearance.
Tighten down conrod bolts with special tool 00 9 120 or with
special tool 11 2 110.
Tightening specifications, 11 24 1AZ .
Remove bearing cap and read off bearing play at width of
flattened plastic thread with assistance of measurement scale.
RA Replacing all conrod bearings (S50) (pistons removed)
BMW AG - TIS
09.02.2013 20:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -