3 Series E36 M3 (S50) SAL
Fit special tool 11 7 350 to VANOS adjustment unit.
Connect up compressed air (2 ... 8 bar).
Disconnect plug connection on solenoid valves on exhaust side.
Connect special tool 12 6 412 and special tool 12 6 410 to
the solenoid valves on the exhaust end.
Connect special tool 12 6 410 to correct terminals on vehicle
battery.
Depress toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and hold down.
At the same time, rotate exhaust camshaft at hex head against
direction of rotation until the camshaft noticeably reaches the stop.
Note:
If necessary, press toggle switches on special
tool 12 6 412 several times in both directions until
camshaft starts to move.
Disconnect plug connection of solenoid valves on intake end.
Connect special tool 12 6 412 to the solenoid valves on the
intake end.
Depress toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and hold down.
RA Checking timing of camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
