3 Series E36 M3 (S50) SAL
Remove sprocket wheel and input shaft for VANOS radial piston
pump from exhaust camshaft.
Remove chain.
Caution!
Do not damage timing case.
Machine open-end wrench accordingly if necessary.
Fit open-end wrench to hex on intake camshaft.
Caution!
Note direction and angle of rotation.
Rotate inlet camshaft inwards with open-end wrench until cam tips
of cylinder 1 are aligned horizontally with camshaft.
Caution!
If dismantled incorrectly, i.e. without fixture, there is a risk of
initial damage or failure of camshaft.
Fit special tool 11 3 400 to depress the inlet camshaft and
screw into spark plug threads of cylinders 2 and 5.
Tightening Torque,
refer to Technical Data 12 12 1AZ.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
