3 Series E36 M3 (S50) SAL
Installation:
Installation of VANOS adjusting unit and camshafts is described
separately from removal. Assembly sequence differs between
removal and installation.
Install exhaust camshaft so that cams of cylinder 1 point
horizontally inwards.
Caution!
Note direction of installation and installation sequence. The
first bearing cover is marked with A and the rest is marked
with A2 to A7.
Check dowel sleeves.
Fit bearing covers.
Caution!
If incorrectly fitted, i.e. without fixture, there is a risk of
preliminary damage or failure of camshaft.
Fit special tool 11 3 400 to press down exhaust camshaft and
screw into spark plug threads of cylinders 2 and 5.
Tightening Torque,
refer to Technical Data 12 12 1AZ.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -