3 Series E36 M3 (S50) SAL
Fit special tool 11 7 350 to VANOS adjustment unit.
Connect up compressed air (2 ... 8 bar).
Disconnect plug connection on solenoid valves on exhaust side.
Connect special tool 12 6 412 and special tool 12 6 410 to
the solenoid valves on the exhaust end.
Connect special tool 12 6 410 to correct terminals on vehicle
battery.
Press toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and hold down.
At the same time, brace exhaust camshaft on hex head against
direction of location until groove in guide bearing is aligned with
groove on first bearing cover.
Note:
If necessary, press toggle switches on special
tool 12 6 412 several times in both directions until
camshaft starts to move.
Disconnect plug connection of solenoid valves on intake end.
Connect special tool 12 6 412 to the solenoid valves on the
intake end.
Press toggle switch on special tool 12 6 412 in direction of
VANOS splined shaft and hold down.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
