3 Series E36 M3 (S50) SAL
Caution!
On removed VANOS adjustment unit, sprockets on intake and
exhaust camshafts are not positively linked to the camshafts.
To prevent valves making contact with pistons, the crankshaft
must not be rotated in this condition.
Adjust intake camshaft on hex head approx. 10
°
in direction of
rotation.
Remove the two loosened screws on the intake end of the
VANOS unit.
Note:
Do not tilt tooth hub during removal. Thrust washer and plate
spring can drop out.
Carefully remove tooth hub from intake end and lift upwards to
remove.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -