3 Series E36 M3 (S50) SAL
Fit half rings to intake side with flat side facing sprocket.
Note:
Plate spring (2) points towards thrust washer with small
locating diameter (3). Thrust washer is guided into tooth hub
by its retaining lugs.
Insert plate spring (2) and thrust washer (3) in tooth hub (1).
Carefully insert tooth hub and plate spring with thrust washer on
intake end from above and place on centring sleeve.
Turn the half-rings in such a way that when the tooth hub is being
fitted the screws can be inserted in the threads (1) first.
Keep to the other assembly sequence (2 and 3).
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -
