3 Series E36 M3 (S50) SAL
Now slacken the two screws accessible on the inlet end of the
VANOS gear two turns.
Caution!
If the screws on the VANOS gear are slackened more than
two turns, they will touch the impeller and the VANOS
adjustment unit may get jammed during removal.
Continue to rotate crankshaft in direction of rotation until the next
two screws on the VANOS gear are accessible.
Unfasten these two screws.
Now slacken the two screws accessible on the inlet end of the
VANOS gear two turns.
Continue to rotate crankshaft in direction of rotation until cylinder 1
is in TDC position.
Secure vibration damper with special tool 11 2 300.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
