3 Series E36 M3 (S50) SAL
Check switching operation of solenoid valves:
Connect special tools 12 6 412 and 12 6 410 to the solenoid
valves on the exhaust end.
Connect special tool 12 6 410 to correct terminals on vehicle
battery.
Press toggle switch on special tool 12 6 412 to extend VANOS
splined shaft.
Splined shaft extends with hydraulic piston.
Press toggle switch on special tool 12 6 412 into position for
retracting VANOS splined shaft.
Splined shaft retracts on hydraulic piston (initial setting).
Connect special tool 12 6 412 to plug connection for solenoid
valves on intake end.
Press toggle switch on special tool 12 6 412 to extend VANOS
splined shaft.
Splined shaft extends with hydraulic piston.
Press toggle switch on special tool 12 6 412 into position for
retracting VANOS splined shaft.
Splined shaft retracts on hydraulic piston (initial setting).
RA Adjusting timing of camshafts (S50 B32)
BMW AG - TIS
09.02.2013 21:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -