3 Series E36 M3 (S50) SAL
Caution!
Do not turn the engine back.
Turn engine in direction of rotation as far as TDC firing position of
first cylinder.
Secure vibration damper with special tool 11 2 300.
Note:
The grooves in the exhaust and intake camshafts are aligned
with the grooves in the first bearing covers.
The cam tips of the exhaust and intake camshafts point to
each other.
Note:
Check camshaft adjustment with special tool 11 5 080.
Special tool 11 5 080 inserted into intake camshaft.
Special tool 11 5 080 must rest on the timing case without a
gap.
Note:
Check camshaft adjustment with special tool 11 5 080.
Special tool 11 5 080 inserted into exhaust camshaft.
Special tool 11 5 080 must rest on the timing case without a
gap.
Remove special tool 11 5 080.
RA Adjusting timing of camshafts (S50 B32)
BMW AG - TIS
09.02.2013 21:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
