3 Series E36 M3 (S50) SAL
Caution!
If removed incorrectly without special tool, there is a risk of
premature damage or failure of the camshaft.
Fit special tool 11 3 400 to intake camshaft and screw into spark
plug threads of cylinders 2 and 5.
Tightening Torque,
refer to Technical Data 12 12 1AZ.
Preload intake camshaft by rotating eccentric shaft.
Unfasten all nuts for bearing cover on intake camshaft.
Caution!
Do not tilt bearing cover when loosening special tool.
Relieve tension on special tool 11 3 400 and remove.
Remove bearing cover and lift out intake camshaft.
Caution!
Note direction and angle of rotation.
Turn exhaust camshaft inwards on hex head until cam tips are
horizontal on cylinder 1.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 20:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
