3 Series E36 M3 (S50) SAL
12 14 535
Replacing sensor for outlet camshaft (S50)
Switch off ignition.
Release screws and remove cover.
Disconnect connector (2).
Release screw from pulse generator.
Remove sensor.
Installation:
Check seal for damage, replacing if necessary.
Interrogate fault memory of DME-control unit, check faults
stored in memory, rectify faults then cancel fault memory.
RA Replacing sensor for outlet camshaft (S50)
BMW AG - TIS
09.02.2013 21:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
