3 Series E36 M3 (S50) SAL
11 36 010
Removing and installing, sealing/replacing
VANOS adjustment unit (S50 B32)
Read fault memory and make a documentary record.
Remove cylinder head cover,
refer to 11 12 000.
Remove fan clutch with fan impeller and fan cowl,
refer to 11 52 020 / 17 11 031.
If necessary, replace filter screw on VANOS adjustment unit.
Tightening Torque,
refer to Technical Data 11 36 8AZ.
Removal
The removal of the VANOS adjustment unit is described
separately from the installation. Assembly sequence for removal
and installation is different.
When the engine is switched off, VANOS moves the camshafts to
a position which is advantageous to engine starting.
Caution!
The camshafts must be turned back to their initial position
before removing the VANOS adjustment unit.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
