bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
3 RA Removing And Installing, Sealing_replacing VANOS Adjustment Unit (S50 B32)|Page 605 > < 3 RA Removing And Installing, Sealing_replacing VANOS Adjustment Unit (S50 B32)

3 Series E36 M3 (S50) SAL

Page 2
background image

Fit special tool 11 5 100 to four screws on crankshaft hub.

Rotate crankshaft in direction of rotation as far as ignition TDC
position of cylinder 1.

Note:

The TDC allocation above the marking is sufficient.

Do "not" fix vibration damper in position with special
tool 11 2 300.

The engine is cranked again later.

Remove cover from plug connectors.

Remove oil line from VANOS adjustment unit.

RA  Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)

BMW AG - TIS

09.02.2013  21:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Removing And Installing, Sealing_replacing VANOS Adjustment Unit (S50 B32)|Page 605 > < 3 RA Removing And Installing, Sealing_replacing VANOS Adjustment Unit (S50 B32)