3 Series E36 M3 (S50) SAL
Remove thrust washer.
Installation:
Retaining lugs locate in spline hub.
Remove sprocket wheel.
Installation:
Align sprocket wheel so that ends of both half-ring sections
are not near camshaft-sensor pin.
Remove half-ring sections.
Installation:
Flat side points towards sprocket wheel.
RA Replacing VANOS transmission unit (S50 B30)
BMW AG - TIS
09.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -