3 Series E36 M3 (S50) SAL
Loosen clamp of hose to oil separator.
Pull off hose.
Unscrew twelve nuts.
Lift manifold on holder and lift off throttle valve assemblies.
Caution!
Lift manifold carefully and tilt downwards to make crankcase
vent-hose connection accessible.
Loosen clamp of hose for crankcase vent.
Pull off hose.
Remove manifold.
Installation:
Mount crankcase vent hose on bracket before installing
manifold.
RA Removing and installing manifold for intake air (S50)
BMW AG - TIS
09.02.2013 21:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
