3 Series E36 M3 (S50) SAL
12 14 600
Replacing knock sensor (S50)
Switch off ignition.
Remove complete manifold, refer to 11 61 050
Plug-in connections on knock sensors:
1.
Knock sensor 1 (for cylinders 1 and 2)
2.
Knock sensor 2 (for cylinders 3 and 4)
3.
Knock sensor 3 (for cylinders 5 and 6)
Installed positions of knock sensors:
Knock sensors 1, 2 and 3.
Unfasten screws and remove knock sensors.
Installation:
Clean contact surfaces of knock sensors on engine block.
For tightening torque, refer to Technical Data 12 14 2AZ
Knock sensor 1:
Can be identified by parts number, length of lead and bush
housing.
RA Replacing knock sensor (S50)
BMW AG - TIS
09.02.2013 22:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
