3 Series E36 M3 (S50) SAL
Unlock and remove cable connector (1).
Unfasten connector socket (2) from the bracket.
Pull reservoir (3) off hydraulic unit.
Note:
Seal connecting bores with suitable plastic caps.
Unfasten hydraulic leads (1... 2).
Note:
Seal connection bores with suitable plastic caps.
Installation:
Tightening torque,
refer to Technical Data 21 52 1AZ.
Loosen nut and pull hydraulic unit upwards to remove from
bracket.
Installation:
The guide journal (1) of the hydraulic unit must engage in the
lower bracket (2).
RA Removing and installing/replacing hydraulic unit (SMG)
BMW AG - TIS
09.02.2013 23:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -