3 Series E36 M3 (S50) SAL
23 41 020
Replacing cable for actuating unit (SMG)
Note:
Set transmission to gear position "0".
Propeller shaft must rotate.
Remove exhaust system,
refer to 18 00 020.
Remove heat shield (1).
Note:
Adjust cable (SMG),
refer to 25 16...
Work step "Set transmission to idling" is omitted as the gear
position "0" (idling) is already set.
RA Replacing cable for actuating unit (SMG)
BMW AG - TIS
09.02.2013 23:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
