3 Series E36 M3 (S52) CONVER
Figure 2
Repair to the main hoop (2):
-
Cut out the plastic shell from the outside along both sides over a length of 70 mm.
-
Fit the repair clip on both sides.
-
Drill a 2.5 mm hole and screw the shell to the hoop from the front using a Philips
screwdriver (refer to figure 3).
Figure 3
Repair to intermediate hoop (3):
-
Loosen the tensioning belt at the intermediate hoop (2 Philips screws on each side).
-
Fit the repair clips to the hoop on both sides from the top.
-
Attach the tensioning belt and repair clips back in place on the hoop again (please
refer to figure 4).
Figure 4
Important:
SI Soft top lining loose E36 Convertible
BMW AG - TIS
09.02.2013 22:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -