3 Series E36 M3 (S52) CONVER
Installation:
Drive in dowel pins from front until flush.
Installation:
Fully tighten all screws in alternate sequence.
Tightening torque, 11 14 1AZ
.
Important!
Once all screws have been tightened down, retighten them in
a second operation.
Insert screws, tighten screw connection for timing case cover to
cylinder head.
Replace radial seal in lower timing case cover.
Assemble engine.
RA Removing and installing lower timing case cover (M52 / S52 / M52TU / M54)
BMW AG - TIS
10.02.2013 00:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -