3 Series E36 M3 (S52) CONVER
11 23 010
Removing and installing or replacing
vibration damper (M50 / M52 / S52)
Unscrew and remove splash guard.
Remove fan impeller with fan clutch.
Remove alternator drive belt.
Unscrew vibration damper bolts and take off vibration damper.
Installation:
Align locating bore in vibration damper to dowel pin.
Install and tighten down screws.
Tightening torque 11 23 3AZ.
RA Removing and installing or replacing vibration damper (M50 / M52 / S52)
BMW AG - TIS
10.02.2013 00:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -