3 Series E36 M3 (S52) CONVER
11 61 050
Removing and installing manifold for intake
air (M52/S52)
Removing intake air housing with mass air flow sensor,
refer to 13 71 000
Remove bulkhead heater (air collector). This operation is
described in section on removing complete wiper console,
refer to 61 61 270
Place cable channel to one side.
Remove adapter from brake force booster.
Remove cover from injection valves.
Unclip plug connections from oxygen sensors.
Unfasten plug connection from VANOS solenoid valve.
Lift connector strip off injection valves and place to one side.
RA Removing and installing manifold for intake air (M52/S52)
BMW AG - TIS
10.02.2013 00:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -