3 Series E36 M3 (S52) CONVER
13 61 000
Removing and installing or replacing control
unit
Special tools required:
•
61 4 410
•
61 4 411
Read fault memory.
Remove battery (except 325i).
General information, refer to Gr. 12 00 .
Release screws (1 ... 4).
Remove cover from firewall.
Caution!
Always switch ignition off before disconnecting or connecting
connector.
Open retaining clip and disconnect plug from control unit.
RA Removing and installing or replacing control unit
BMW AG - TIS
10.02.2013 01:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
