3 Series E36 M3 (S52) CONVER
Engine M43:
Fit carrier of special tool 11 8 022 firmly with knurled screws on
oil pan.
(This special tool prevents the engine from tilting backwards when
the transmission is removed).
All:
Release oil cooler pipe clamps from crankcase and oil pan.
Unscrew front oil cooler pipe.
Installation:
Check O-ring (1), replacing if necessary.
Tightening torque,
refer to Technical Data 17 22 5AZ.
Unscrew rear oil cooler pipe.
Installation:
Check seals, replacing if necessary.
Tightening torque,
refer to Technical Data 17 22 6AZ.
RA Removing and installing automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
10.02.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -