3 Series E36 M3 (S52) CONVER
24 40 007
Removing and installing / replacing torque
converter (A5S 300J)
Remove transmission,
refer to 24 00 027.
Using special tool 24 4 000., carefully remove torque converter
from primary pump.
Caution!
Escaping ATF.
The torque converter cannot be cleaned using conventional
cleaning materials and must be replaced if damaged.
Note:
Note designation of the torque converter.
Installation:
Check O-ring (2) on input shaft, replacing if necessary.
RA Removing and installing / replacing torque converter (A5S 300J)
BMW AG - TIS
10.02.2013 02:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -