3 Series E36 M3 (S52) CONVER
Unscrew bolt.
Installation:
Use washers on both sides.
Replace self-locking nut.
Tightening torque,
refer to Technical Data 31 21 4AZ.
Unscrew nut and pull off ball joint with special tool 31 2 160.
Take off steering knuckle.
Installation:
Remove grease from bore and pin.
Replace self-locking nut.
Tightening torque,
refer to Technical Data 31 12 6AZ.
Caution!
Different steering knuckles are available for vehicles with or
without power steering.
Cross reference on basis of code (K):
-
787 L (left) with power steering unit
-
788 R (right) with power steering unit
-
195 L (left) without power steering unit
-
196 R (right) without power steering unit
-
357 L (left) M3
-
358 R (right) M3
RA Replacing left or right steering knuckle
BMW AG - TIS
10.02.2013 03:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -