3 Series E36 M3 (S52) CONVER
1
Housing cover
2
Thrust washer
3
Plate spring
4
Lug disc
5
Spacer
6
Plate spring
7
Outer disc
8
Inner disc
9
Compression ring
10
Differential side gear
11
Differential gears with differential shafts
12
Differential housing
Install following parts in correct installed order to measure the
preload:
Spacer disc (5), outer discs (7), inner discs (8), compression rings
(9), rear axle shaft gears (10) and differential bevel gears and
differential shafts (11).
Measure dimension A from edge of housing to outer disc, e.g. A =
19.5 mm.
Measure dimension B on cover, e.g. B = 14.4 mm.
RA Dismantling and reassembling limited slip differential (Type M) - rear axle remo
BMW AG - TIS
10.02.2013 04:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -