3 Series E36 M3 (S52) CONVER
34 41 220
Removing and installing or replacing all
handbrake shoes (disk brakes)
Note:
Remove rear brake disk,
refer to 34 21 320
Installation:
Adjust handbrake
refer to 34 10 014
Disconnect return springs with brake spring pliers.
Installation:
Check return springs, replacing if necessary.
Twist clamping pin through 90
°
with special tool 34 4 000 and
disconnect.
Spread brake shoes apart at bottom and lift off in upwards
direction.
RA Removing and installing or replacing all handbrake shoes (disk brakes)
BMW AG - TIS
10.02.2013 05:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -