3 Series E36 M3 (S52) CONVER
35 21 000
Removing and installing brake pedal
Note:
Remove and install panelling for instrument panel,
see gr. 51
Remove brake-light switch,
see group 61
Disconnect return spring for brake pedal.
Take off locking clip for shaft pin of brake pedal.
Push out shaft pin.
Installation:
Lubricate sliding surfaces with grease,
see Technical Data.
Take off locking clip (1) for brake pedal.
Pull off brake pedal (2).
Installation:
Check bearing sleeves (1), replacing if necessary.
Lubricate sliding surfaces with grease,
see Technical Data.
RA Removing and installing brake pedal
BMW AG - TIS
10.02.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -