3 Series E36 M3 (S52) CONVER
41 11 029
Replacing right engine support (partial
replacement in front of front axle) (E36)
Instructions on body repair,
refer to 41 00
Place vehicle on straightening bench.
Caution!
Different straightening attachment take-up points of stabilizer
bracket on engine carrier depending on stabilizer connection
(spring strut or control arm).
Remove or disconnect following parts:
-
Complete bumper
-
Front grill
-
Radiator assembly
-
Cover in wheel housing
-
Both headlight units
-
Container for windscreen wash unit
-
Air filter with suction fixture
-
Hood lock, left/right
Other vehicle parts located in the repair zone or subject to be
damaged from heat, sparks or dust, must be removed or covered.
Mark cutting line and cut off engine carrier.
Distance (A) = max. 65 mm
Cut off new engine carrier to size to match cut on car and fit in.
Clean mating surfaces and drill holes for plug welding.
RA Replacing right engine support (partial replacement in front of front axle) (E36
BMW AG - TIS
10.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -