3 Series E36 M3 (S52) CONVER
When using a new part:
Adjust wheel housing extension and weld.
When using the removed side frame:
Clean connection points on side frame.
Adjust side frame and weld up.
When using the removed side frame:
Set welding spots on connection for lower door section.
Set welding spots on connection for side member cover.
When using a new part:
Adapt side frame.
Mark out holes for plug-welding connection between door opening
and side member cover.
Remove side frame.
Drill holes for plug welding.
Clean connection points and coat with zinc dust paint.
RA Replacing rear left outer section of wheel housing (side panel removed)
BMW AG - TIS
10.02.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -