3 Series E36 M3 (S52) CONVER
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
Reinstall gas pressure prop.
Screw in detent buffers until left and right sides of trunk lid locate
against detent buffers when closed.
Caution!
Trunk lid must not protrude above side panels otherwise
height adjustment can be distorted!
Gently twist ejector in detent buffers to right with Phillips
screwdriver. This unlocks the detent buffers, enabling ejector to
emerge.
RA Adjusting trunk lid to fit (4-door/2-door/convertible)
BMW AG - TIS
10.02.2013 07:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -