3 Series E36 M3 (S52) CONVER
51 25 011
Removing and installing / replacing Bowden
cable (actuation reversal on trunk lid)
Open side windows.
Unlock soft top and raise over dead center.
Lift clamping bracket and soft top compartment cover upright.
Removing actuating lever,
refer to 51 25 010
If necessary, remove loudspeakers,
refer to 65 12 020
Squeeze together Bowden cable and lift out.
Remove cover on center guide (transfer point).
Lift out cover on reversing mechanism.
Lift out retaining plate and disconnect Bowden cable. Squeeze
together locking device and lift out Bowden cable.
Installation note:
Adjust Bowden cable to zero backlash.
RA Removing and installing / replacing Bowden cable (actuation reversal on trunk li
BMW AG - TIS
10.02.2013 08:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -