3 Series E36 M3 (S52) CONVER
51 25 013
Removing and installing / replacing right
Bowden cable (convertible lid)
Open side windows.
Unlock soft top and raise over dead center.
Lift clamping bracket and soft top compartment cover upright.
Remove tab washers (1) and (2).
Squeeze together locking device and lift out Bowden cable.
Lift out cover from reversing mechanism.
Lift out retaining plate and disconnect Bowden cable. Squeeze
together locking device and lift out Bowden cable.
Installation:
Adjust Bowden cable to zero backlash.
RA Removing and installing / replacing right Bowden cable (convertible lid)
BMW AG - TIS
10.02.2013 08:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -