3 Series E36 M3 (S52) CONVER
Retraction:
1.
Fit together special tool and screwdriver handle (from vehicle tool kit).
2.
Pull out headrest in upwards direction.
3.
Insert special tool firmly home in guide for pawl detent mechanism and secure, if necessary, slightly raising the
roll-bar.
4.
Slide rollover protection bracket so far in that special tool works loose.
5.
Press protective bracket back down => protective bracket engages with pendulum support on spring-loaded
release lever.
6.
Reinstall headrest.
7.
Also retract the second bracket.
RA Notes on rollover protection system (RPS)
BMW AG - TIS
10.02.2013 09:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -