3 Series E36 M3 (S52) CONVER
Installation:
Turning lock must engage. Install washers.
Tightening Torque, refer to Technical Data 72 11 1AZ.
Remove cover, refer to 51 47 030
Remove belt lock.
Installation:
Install washers.
Tightening Torque, refer to Technical Data 72 11 1AZ.
Remove cap (1).
Unscrew bolt (2) and remove together with shim (3).
Pull out end plate (4) to one side.
Pull out automatic reel.
Installation:
Automatic reel must snap into place in hooks at backrest
shelf.
Tightening Torque, refer to Technical Data 72 11 1AZ.
RA Removing and installing or replacing all rear seat belts (complete)
BMW AG - TIS
10.02.2013 12:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -