3 Series E36 M3 (S52) COUPE
11 31 091
Removing and installing/replacing hydraulic
chain tensioners (S52)
Caution!
Strong spring force.
Unfasten cylinders for chain tensioning piston and remove
hydraulic chain tensioner.
Installation:
If a hydraulic chain tensioner is reused, the oil chamber in the
tensioner unit must first be drained.
Place hydraulic chain tensioner on level base and carefully
compress.
Repeat this procedure twice.
Installation:
Install hydraulic chain tensioner (1) in cylinder for chain
tensioning piston (2).
Replace sealing ring (3).
Install and tighten down cylinder for chain tensioning
piston (2).
Tightening torque,
refer to Technical Data 11 31 8AZ
RA Removing and installing/replacing hydraulic chain tensioners (S52)
BMW AG - TIS
10.02.2013 02:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -