3 Series E36 M3 (S52) SAL
13 62 560
Removing and installing/replacing mass air
flow sensor (M52,S52)
Interrogate fault memory of DME control unit.
Switch off ignition.
Twist and remove connector (1).
Unfasten hose clip and remove rubber gaiter (2) from throttle
body.
Loosen clamps (3 and 4).
Remove air-mass sensor with bellows.
RA Removing and installing/replacing mass air flow sensor (M52,S52)
BMW AG - TIS
10.02.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -