3 Series E36 M3 (S52) SAL
24 00 007
Adjusting shift lever
Move selector lever (1) to "P".
Loosen nut (2).
Caution!
Always brace bolt with special tool 24 5 210 to avoid deformation of the cable.
Note:
special tool can only be fitted in position "P".
Press lever (3) forward (park position).
Press cable rod (4) in opposite direction to travel and then release again.
Clamp cable rod (4) by tightening nut (2) (brace with special tool 24 5 210.
Tightening torque: 10 ... 12 Nm.
RA Adjusting shift lever
BMW AG - TIS
10.02.2013 07:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
