3 Series E36 M3 (S52) SAL
Remove circlip.
Installation:
Replace stretched or damaged circlip.
Ensure correct seating.
Pull out the angular-contact ball bearing using special tool
33 3 261 /262 /263.
Caution!
Do not reuse the old angular contact ball bearing.
Note installation direction of wheel bearing.
The red sealing ring must face outwards; otherwise ABS
function is not assured by the impulse sensor integrated in the
bearing.
Pull in a new angular-contact ball bearing (1) using special tool
33 3 261 /264 /265.
RA Replacing left or right wheel bearing on rear axle shaft (M3, M Roadster, M Coup
BMW AG - TIS
10.02.2013 09:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -