3 Series E36 M3 (S52) SAL
34 51 ...
Removing and installing or replacing ASC+T
accumulator
Installation:
Bleed accumulator,
refer to 34 00 048
Position 5.
Remove liner of left front side panel.
Discharge accumulator
Caution!
Pressure in accumulator will be approx. 120 bar.
Connect bleeder hose with bottle and carefully loosen bleeder
screw.
Unlock and pull off cable connector.
RA Removing and installing or replacing ASC+T accumulator
BMW AG - TIS
10.02.2013 10:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -