3 Series E36 M3 (S52) SAL
41 00 100
Replacing unfinished body shell M3
Adapt reinforcement for transmission bracket on left and right
sides: bores must be aligned with one another.
Mark and clean connection points.
Clean connection points on reinforcements.
Fit reinforcing members, checking location of bores and correcting
if necessary.
Weld reinforcing members all round.
Adapt reinforcing members for rear axle carrier support at front
and back on left and right sides. Bores for screws on rear axle
carrier bracket must be aligned with one another.
Mark and clean connection points.
Clean connection points on reinforcements.
Fit reinforcing members, checking location of bores and correcting
if necessary.
Weld reinforcing members all round.
Weld bores (1) in reinforcing elements closed.
RA Replacing unfinished body shell M3
BMW AG - TIS
10.02.2013 11:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -