3 Series E36 M3 (S52) SAL
Remove scrap metal. Straighten and grind joint surfaces.
Remove scrap metal. Straighten and grind joint surfaces.
Fit in wheel housing replacement section and cut to size roughly.
Caution!
There must be at least 30 mm overlap at mating surfaces.
Do not cover up openings.
Fit in wheel housing replacement section with help of straightening
rig.
Caution!
There must be at least 30 mm overlap (A).
Do not cover up opening (1).
RA Replacing right front wheel housing (partial replacement up to engine firewall)
BMW AG - TIS
10.02.2013 11:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
