3 Series E36 M3 (S52) SAL
Removing Power Seat with Faulty Seat Forward/Back Gearbox:
Run seat up as far as possible.
Lift out securing plugs at front and rear and remove plate (1).
Installation:
Retainer must fit central to the counterpiece.
Press on plate and install plugs.
If seat is in this position:
Remove caps at front and unscrew left and right screws (1 and 2).
Remaining procedures, refer to 52 10 000
Installation:
For tightening torque, refer to Technical Data
If seat is not in position, gearboxes for longitudinal adjustment
must be removed.
Removing seat cushions, refer to 52 10 079
Caution!
Deactivating belt-lock tightener:
Turn slotted head screw until green mark in sight glass changes to
red.
Installation:
Turn mark to green.
Seat belt lock tensioner will not work if at red mark!
RA Removing and installing left or right front seat
BMW AG - TIS
10.02.2013 13:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -