3 Series E36 M3 (S52) SAL
Caution!
Check lid for tight fit.
Press slide/tilt sun roof lid upwards to front left/right with
palms of hands from below.
It should not be possible to raise the slide/tilt sun roof cover.
Press slide/tilt sun roof forwards.
Replace all nuts (microencapsulation) or refit old nuts with Loctite
270 (Sourcing Reference: BMW Parts Service).
Turn nuts (2) as far as stop.
Do not tighten!
Lower slide/tilt sun roof lid at back by dimension (A).
Dimension (A) = 2 ... 4 mm
Slowly pull the floating roof liner forward as far as possible.
Only version with carriage and no retaining springs:
Open sun roof lid about 250 mm.
Carefully press slide/tilt sun roof lid upwards, insert retaining
screws (2) at left and right and tighten down.
Adjust slide/tilt sun roof,
refer to 54 12 004
RA Removing and installing lid on slide/tilt sun roof
BMW AG - TIS
10.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -