3 Series E36 M coupe (S50) COUPE
Unfasten screws on front timing case.
Tightening torque,
refer to Technical Data 11 12 13AZ
Remove all screws from timing case.
Installation:
Tightening torque,
refer to Technical Data 11 12 13AZ
Remove timing case.
Installation:
Clean sealing faces at cylinder head and degrease.
Check O-rings and replace if necessary.
RA Removing and installing or replacing timing case (upper section of cylinder head
BMW AG - TIS
09.02.2013 14:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -